EZ Poly Concrete Crack Filler Bonds, Fills and Rebuilds Concrete

About EZ Poly

NEW! CONCRETE PATCH, FILLER AND SEALER THAT CAN BE USED IN WET OR DRY CONDITIONS!

Concrete Crack Filler - So versatile it will do more and work better than any concrete patch product weŠve ever found. It fills, patches, rebuilds, seals and resurfaces cracks, chips, holes and spalls in concrete and cement patios, driveways, sidewalks, docks, garage and warehouse floors and ramps. It structurally builds and rebuilds concrete foundations. This extraordinary mending agent is one of the best new and innovative specialty fillers for the home and commercial use to come along in years. Concrete Crack Filler is a high tech, two part, polyurethane based material also used as an industrial strength adhesive; bonds indoors, outdoors, even in wet conditions! Up to 20 minutes working time allows plenty of time to do the job right the first time. Starts out like pancake batter to reach hard to get to places. Easily forms to almost any shape, works like putty and once cured can be sanded, sawed, drilled, nailed and painted easily. Not an epoxy. No obnoxious fumes or toxic vapors, cleans up with soap and water. Mix equal parts of A&B in temperatures as low as 0 degrees F. Now available in convenient SpakPaks, perfect for your tool box. Just pull the easy release divider pin and knead the two pre-measured parts A&B for a fast, clean and perfect repair anytime. No need for cups or sticks and the packaging is its own applicator! Paint when used outside to match adjacent colors.
 

Uses of EZ Poly Concrete Crack Filler:

• Adhesive: Bonds to concrete, tile, masonry, asphalt materials.  Also bonds to wood, metals, ceramics, fiberglass, hard plastics, porcelain and glass.
• Filler: Fill cracks or spalled areas in concrete. Patch and fill dents, scratches, and hole.  Resurface delaminated concrete surfaces.
• Sealant: Provide waterproof and weatherproof seals on non flexing surfaces.

 

FEATURES and BENEFITS:

• Bonds and adheres to dissimilar surfaces
• Easy to apply, 1:1 mix ratio by volume
• Feather to less than paper thin applications
• Extended curing cycle
• Impervious to most acids
• Workable with power tools when cured, i.e. cut, drill, sand, shape, carve, paint or nail without fracturing
• Cures underwater (fresh or salt water)
• Packaged in pre-measured containers to assure proper mixing
• Glues to itself to form a seamless bond
• Low exothermic reaction even when mixed in quantity
• Contains no solvents or volatiles (VOC's)
• No toxic fumes or flammability
• Not D.O.T. regulated

MIXING DIRECTIONS:

Specially designed mixing bag works as it's own applicator.  No mess or mixing bowls or sticks needed.  Simply remove the clip and massage the contents inside the special two-chamber bag by rolling it between both hands.  When the contents are smooth throughout, cut a corner and squeeze EZ Poly Concrete Crack Filler out of the bag.  For most liquidity, apply immediately after mixing.

 

3 EASY STEPS:

1. Remove clip and knead to mix thoroughly
2. Pour into cracks or apply as paste to affected surfaces
3. Finish with sanding or filing within 2 hours

DISCLAIMER. Recommendations for product use are based on tests believed to be reliable. Field conditions vary widely. For this reason, the user must determine product suitability for the particular use and specific method(s) of application. THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR LOSS OR DAMAGE, DIRECT, INCIDENTAL OR CONSEQUENTIAL, REGARDLESS OF THE LEGAL THEORY ASSERTED, INCLUDING NEGLIGENCE AND/OR STRICT LIABILITY. The foregoing may be altered only by an agreement signed by officers of seller and manufacturer.