EZ Poly Multi Mender Bonds, Fills and Rebuilds Almost Anything

EZ Poly Multi Mender is a variable viscosity, two-component, construction grade Adhesive that can be used as a structural filler and as a sealant.  EZ Poly Multi Mender is a polymer material that can be worked while curing, unlike any other product! No VOCĒs or toxic fumes.  Not flammable.  Even works underwater. Mixed in equal parts by volume. Also works as an Insulator.

Uses of EZ Poly Multi Mender:

• Adhesive: Bonds to most wood, metals, ceramics, concrete, fiberglass, hard plastics, porcelain tile, masonry and glass.
• Structural Filler:  Patch and fill dents, scratches, cracks and holes.  Refurbish distressed or rotted wood conditions.  Fill cracks or spalled areas in concrete.
• Sealant: Provide waterproof and weatherproof seals on non flexing surfaces.

FEATURES and BENEFITS:

• Bonds and adheres to dissimilar surfaces
• Easy-to-apply, 1:1 mix ratio by volume
• Extended curing cycle
• Impervious to most acids
• Workable as hardwood when cured, i.e. cut, drill, sand, shape, carve, paint, stain or nail without fracturing
• Cures underwater (fresh or salt water)
• Excellent electrical potting compound
• Packaged in pre-measured containers to assure proper mixinga. eliminates mishandling and mismatching components
• Colorable with any dry powdered colorants
• Glues to itself to form a seamless bond
• Works as an Insulator
• Low exothermic reaction when mixed in quantity
• Contains NO solvents or volatiles (VOCĒs)
• NO Toxic fumes or flammability
• NOT D.O.T. regulated
   

MIXING DIRECTIONS:

Specially designed mixing bag works as it's own applicator.  No mess or mixing bowls or sticks needed.  Simply remove the clip and massage the contents inside the special two-chamber bag by rolling it between both hands.  When the contents are smooth throughout, cut a corner and squeeze EZ-Poly out of the bag.  For most liquidity, apply immediately after mixing

 

3 EASY STEPS:

1. Remove clip and knead to mix thoroughly
2. Pour into cracks or apply as paste to affected surfaces
3. Finish with sanding or filing within 2 hours

 

TIME LINE:

5 minutes      Semi liquid (pours)
10 minutes    Pancake batter, for spreading and vertical applications
20 minutes    Putty for shaping or carving
40 minutes    Can be carved with a knife
2 hours          Hard enough for power tools, drill, sand, shave, route, plane, nail or glue to itself
24 hours        Fully cured for painting or staining

DISCLAIMER. Recommendations for product use are based on tests believed to be reliable. Field conditions vary widely. For this reason, the user must determine product suitability for the particular use and specific method(s) of application. THE FOLLOWING IS MADE IN LIEU OF ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Sellers and manufacturers only obligation shall be to replace such quantity of the product proved to be defective. NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR LOSS OR DAMAGE, DIRECT, INCIDENTAL OR CONSEQUENTIAL, REGARDLESS OF THE LEGAL THEORY ASSERTED, INCLUDING NEGLIGENCE AND/OR STRICT LIABILITY. The foregoing may be altered only by an agreement signed by officers of seller and manufacturer.